Differences

This shows you the differences between two versions of the page.

--- dig:lab_5 [2011/04/04 14:39] – tobi
+++ dig:lab_5 [2024/02/29 07:28] (current) – external edit 127.0.0.1
@@ Line 8: / Line 8: @@
   - Keep sensitive electrical nodes far away from the noisy digital servo control.
   - Place at least one bypass capacitor near the microphone preamplifier circuit.
-  - Don't put components under the AVR32...
+  - Don't put components over the AVR32.
+  - Check your board against this [[https://docs.google.com/document/d/1LDnsXAI-d0QC109TMCDpa1lSC8Ziw72A6u2GWj1pEOE/edit?usp=sharing|checklist of PCB design hints]].
 You may find it helpful to again scan the {{dig:eagle_manual_en.pdf|Eagle manual}} and tutoral ({{dig:eagle_tutorial_en.pdf|en}} {{dig:eagle_tutorial_de.pdf|de}}).  You might also find it helpful to open the integrated help in Eagle, for instance while routing wires (ROUTE). The help shows you which mouse button and keys places vias, changes wire direction, changes layers, etc.
@@ Line 17: / Line 18: @@
 When you are finished with your board schematic and layout, send a zip/tgz archive of your design to [[tobi@ini.phys.ethz.ch?subject=micboard design for Electronics for Physicists II]]