<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
<storageModule moduleId="org.eclipse.cdt.core.settings">
<cconfiguration id="avr32.managedbuild.config.gnu.exe.debug.529300467">
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="avr32.managedbuild.config.gnu.exe.debug.529300467" moduleId="org.eclipse.cdt.core.settings" name="Debug">
<externalSettings/>
<extensions>
<extension id="org.eclipse.cdt.managedbuilder.core.ManagedBuildManager" point="org.eclipse.cdt.core.ScannerInfoProvider"/>
<extension id="com.atmel.avr.toolchain.avr32gcc.elf32-avr32" point="org.eclipse.cdt.core.BinaryParser"/>
<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
</extensions>
</storageModule>
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
<configuration artifactName="blink" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.debug,org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="AVR32 Standalone debug configuration" id="avr32.managedbuild.config.gnu.exe.debug.529300467" name="Debug" parent="avr32.managedbuild.config.gnu.exe.debug">
<folderInfo id="avr32.managedbuild.config.gnu.exe.debug.529300467." name="/" resourcePath="">
<toolChain id="avr32.managedbuild.toolchain.gnu.exe.debug.1372586280" name="32-bit AVR/GNU C/C++ Toolchain" superClass="avr32.managedbuild.toolchain.gnu.exe.debug">
<targetPlatform id="avr32.managedbuild.target.gnu.platform.exe.debug.522943813" name="%PlatformName.Dbg" superClass="avr32.managedbuild.target.gnu.platform.exe.debug"/>
<builder buildPath="${workspace_loc:/blink/Debug}" id="avr32.managedbuild.target.gnu.builder.exe.debug.1658868292" keepEnvironmentInBuildfile="false" name="CDT Internal Builder" superClass="avr32.managedbuild.target.gnu.builder.exe.debug"/>
<tool id="avr32.managedbuild.tool.gnu.archiver.exe.debug.426949828" name="32-bit AVR/GNU Archiver" superClass="avr32.managedbuild.tool.gnu.archiver.exe.debug"/>
<tool id="avr32.managedbuild.tool.gnu.cpp.compiler.exe.debug.141286098" name="32-bit AVR/GNU C++ Compiler" superClass="avr32.managedbuild.tool.gnu.cpp.compiler.exe.debug">
<option id="gnu.cpp.compiler.option.optimization.level.1130582705" name="Optimization Level" superClass="gnu.cpp.compiler.option.optimization.level" value="gnu.cpp.compiler.optimization.level.none" valueType="enumerated"/>
<option id="gnu.cpp.compiler.option.debugging.level.810607610" name="Debug Level" superClass="gnu.cpp.compiler.option.debugging.level" value="gnu.cpp.compiler.debugging.level.max" valueType="enumerated"/>
<option id="avr32.cpp.compiler.option.mcu.1290383138" name="Microcontroller Unit" superClass="avr32.cpp.compiler.option.mcu" value="-mpart=uc3b1256" valueType="string"/>
<option id="gnu.cpp.compiler.option.include.paths.1205324005" name="Include paths (-I)" superClass="gnu.cpp.compiler.option.include.paths" valueType="includePath">
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/DRIVERS/GPIO"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS"/>
</option>
<option id="avr32.cpp.compiler.option.flashvault.1093598347" name="Enable FlashVault support" superClass="avr32.cpp.compiler.option.flashvault" value="false" valueType="boolean"/>
</tool>
<tool id="avr32.managedbuild.tool.gnu.c.compiler.exe.debug.442220668" name="32-bit AVR/GNU C Compiler" superClass="avr32.managedbuild.tool.gnu.c.compiler.exe.debug">
<option defaultValue="gnu.c.optimization.level.none" id="gnu.c.compiler.option.optimization.level.1775965035" name="Optimization Level" superClass="gnu.c.compiler.option.optimization.level" valueType="enumerated"/>
<option id="gnu.c.compiler.option.debugging.level.371408372" name="Debug Level" superClass="gnu.c.compiler.option.debugging.level" value="gnu.c.debugging.level.max" valueType="enumerated"/>
<option id="avr32.c.compiler.option.mcu.262947516" name="Microcontroller Unit" superClass="avr32.c.compiler.option.mcu" value="-mpart=uc3b1256" valueType="string"/>
<option id="gnu.c.compiler.option.optimization.flags.1653298314" name="Other optimization flags" superClass="gnu.c.compiler.option.optimization.flags" value="-fdata-sections" valueType="string"/>
<option id="gnu.c.compiler.option.preprocessor.def.symbols.777446541" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" valueType="definedSymbols">
<listOptionValue builtIn="false" value="BOARD=USER_BOARD"/>
</option>
<option id="gnu.c.compiler.option.include.paths.1947974231" name="Include paths (-I)" superClass="gnu.c.compiler.option.include.paths" valueType="includePath">
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/DRIVERS/GPIO"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/BOARDS"/>
</option>
<option id="avr32.c.compiler.option.flashvault.988956532" name="Enable FlashVault support" superClass="avr32.c.compiler.option.flashvault" value="false" valueType="boolean"/>
<inputType id="avr32.managedbuild.tool.gnu.c.compiler.input.305724172" superClass="avr32.managedbuild.tool.gnu.c.compiler.input"/>
</tool>
<tool id="avr32.managedbuild.tool.gnu.c.linker.exe.debug.1572299722" name="32-bit AVR/GNU C Linker" superClass="avr32.managedbuild.tool.gnu.c.linker.exe.debug">
<option id="avr32.c.linker.option.mcu.1196561361" name="Microcontroller Unit" superClass="avr32.c.linker.option.mcu" value="-mpart=uc3b1256" valueType="string"/>
<option id="gnu.c.link.option.nostart.884050076" name="Do not use standard start files (-nostartfiles)" superClass="gnu.c.link.option.nostart" value="true" valueType="boolean"/>
<option id="gnu.c.link.option.ldflags.195065417" name="Linker flags" superClass="gnu.c.link.option.ldflags" value="-Wl,--gc-sections -Wl,-e,_trampoline -T../src/SOFTWARE_FRAMEWORK/UTILS/LINKER_SCRIPTS/AT32UC3B/0256/GCC/link_uc3b0256.lds" valueType="string"/>
<option id="gnu.c.link.option.paths.1281117699" name="Library search path (-L)" superClass="gnu.c.link.option.paths" valueType="libPaths">
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/BOARDS"/>
</option>
<option id="gnu.c.link.option.libs.1619962840" name="Libraries (-l)" superClass="gnu.c.link.option.libs" valueType="libs">
<listOptionValue builtIn="false" value="newlib_addons-at32ucr1-speed_opt"/>
</option>
<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.1413365484" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
<additionalInput kind="additionalinput" paths="$(LIBS)"/>
</inputType>
</tool>
<tool id="avr32.managedbuild.tool.gnu.cpp.linker.exe.debug.862191699" name="32-bit AVR/GNU C++ Linker" superClass="avr32.managedbuild.tool.gnu.cpp.linker.exe.debug">
<option id="avr32.cpp.linker.option.mcu.1231211342" name="Microcontroller Unit" superClass="avr32.cpp.linker.option.mcu" value="-mpart=uc3b1256" valueType="string"/>
<option id="gnu.cpp.link.option.libs.1807886903" name="Libraries (-l)" superClass="gnu.cpp.link.option.libs" valueType="libs">
<listOptionValue builtIn="false" value="newlib_addons-at32ucr1-speed_opt"/>
</option>
<option id="gnu.cpp.link.option.paths.933105672" name="Library search path (-L)" superClass="gnu.cpp.link.option.paths" valueType="libPaths">
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS"/>
</option>
</tool>
<tool id="avr32.managedbuild.tool.gnu.assembler.exe.debug.1519994503" name="32-bit AVR/GNU Assembler" superClass="avr32.managedbuild.tool.gnu.assembler.exe.debug">
<option id="avr32.both.asm.option.debugging.level.1120109846" name="Debug Level" superClass="avr32.both.asm.option.debugging.level" value="avr32.both.asm.debugging.level.max" valueType="enumerated"/>
<option id="avr32.both.asm.option.mcu.1696874083" name="Microcontroller Unit" superClass="avr32.both.asm.option.mcu" value="-mpart=uc3b1256" valueType="string"/>
<option id="gnu.both.asm.option.include.paths.717767184" name="Include paths (-I)" superClass="gnu.both.asm.option.include.paths" valueType="includePath">
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/DRIVERS/GPIO"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/BOARDS"/>
</option>
</tool>
<tool id="avr32.managedbuild.tool.gnu.preprocessor.exe.debug.259688342" name="32-bit AVR/GNU Preprocessing Assembler" superClass="avr32.managedbuild.tool.gnu.preprocessor.exe.debug">
<option id="avr32.both.preprocessor.option.debugging.level.1865215404" name="Debug Level" superClass="avr32.both.preprocessor.option.debugging.level" value="avr32.both.preprocessor.debugging.level.max" valueType="enumerated"/>
<option id="avr32.both.preprocessor.option.mcu.1540671454" name="Microcontroller Unit" superClass="avr32.both.preprocessor.option.mcu" value="-mpart=uc3b1256" valueType="string"/>
<option id="avr32.both.preprocessor.option.flags.374659588" name="Assembler flags" superClass="avr32.both.preprocessor.option.flags" value="-Wa,-g" valueType="string"/>
<option id="avr32.both.preprocessor.option.paths.1663216441" name="Include paths (-I)" superClass="avr32.both.preprocessor.option.paths" valueType="includePath">
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/DRIVERS/GPIO"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/BOARDS"/>
</option>
<inputType id="avr32.managedbuild.tool.gnu.preprocessor.input.813083430" superClass="avr32.managedbuild.tool.gnu.preprocessor.input"/>
</tool>
</toolChain>
</folderInfo>
<sourceEntries>
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="src"/>
</sourceEntries>
</configuration>
</storageModule>
<storageModule moduleId="scannerConfiguration">
<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
<profile id="com.atmel.avr32.debug.AVR32ManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32ManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32StandardMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32StandardMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxStandardMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxStandardMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="makefileGenerator">
<runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/${specs_file}&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'g++ -E -P -v -dD &quot;${plugin_state_location}/specs.cpp&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/specs.c&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<scannerConfigBuildInfo instanceId="avr32.managedbuild.config.gnu.exe.debug.529300467;avr32.managedbuild.config.gnu.exe.debug.529300467.;avr32.managedbuild.tool.gnu.c.compiler.exe.debug.442220668;avr32.managedbuild.tool.gnu.c.compiler.input.305724172">
<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.atmel.avr32.debug.AVR32ManagedMakePerProjectProfileC"/>
<profile id="com.atmel.avr32.debug.AVR32ManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32ManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32StandardMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32StandardMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxStandardMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxStandardMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="makefileGenerator">
<runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/${specs_file}&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'g++ -E -P -v -dD &quot;${plugin_state_location}/specs.cpp&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/specs.c&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
</scannerConfigBuildInfo>
<scannerConfigBuildInfo instanceId="avr32.managedbuild.config.gnu.exe.release.753206473;avr32.managedbuild.config.gnu.exe.release.753206473.;avr32.managedbuild.tool.gnu.c.compiler.exe.release.1039047172;avr32.managedbuild.tool.gnu.c.compiler.input.150529796">
<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.atmel.avr32.debug.AVR32ManagedMakePerProjectProfileC"/>
<profile id="com.atmel.avr32.debug.AVR32ManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32ManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32StandardMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32StandardMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxStandardMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxStandardMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="makefileGenerator">
<runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/${specs_file}&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'g++ -E -P -v -dD &quot;${plugin_state_location}/specs.cpp&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/specs.c&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
</scannerConfigBuildInfo>
</storageModule>
<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
<storageModule moduleId="org.eclipse.cdt.core.language.mapping"/>
<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
</cconfiguration>
<cconfiguration id="avr32.managedbuild.config.gnu.exe.release.753206473">
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="avr32.managedbuild.config.gnu.exe.release.753206473" moduleId="org.eclipse.cdt.core.settings" name="Release">
<externalSettings/>
<extensions>
<extension id="org.eclipse.cdt.managedbuilder.core.ManagedBuildManager" point="org.eclipse.cdt.core.ScannerInfoProvider"/>
<extension id="com.atmel.avr.toolchain.avr32gcc.elf32-avr32" point="org.eclipse.cdt.core.BinaryParser"/>
<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
</extensions>
</storageModule>
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
<configuration artifactName="blink" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release,org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="AVR32 Standalone release configuration" id="avr32.managedbuild.config.gnu.exe.release.753206473" name="Release" parent="avr32.managedbuild.config.gnu.exe.release">
<folderInfo id="avr32.managedbuild.config.gnu.exe.release.753206473." name="/" resourcePath="">
<toolChain id="avr32.managedbuild.toolchain.gnu.exe.release.1834126796" name="32-bit AVR/GNU C/C++ Toolchain" superClass="avr32.managedbuild.toolchain.gnu.exe.release">
<targetPlatform id="avr32.managedbuild.target.gnu.platform.exe.release.123936149" name="%PlatformName.Dbg" superClass="avr32.managedbuild.target.gnu.platform.exe.release"/>
<builder buildPath="${workspace_loc:/blink/Release}" id="avr32.managedbuild.target.gnu.builder.exe.release.1169202261" keepEnvironmentInBuildfile="false" name="CDT Internal Builder" superClass="avr32.managedbuild.target.gnu.builder.exe.release"/>
<tool id="avr32.managedbuild.tool.gnu.archiver.exe.release.1059999968" name="32-bit AVR/GNU Archiver" superClass="avr32.managedbuild.tool.gnu.archiver.exe.release"/>
<tool id="avr32.managedbuild.tool.gnu.cpp.compiler.exe.release.1585295590" name="32-bit AVR/GNU C++ Compiler" superClass="avr32.managedbuild.tool.gnu.cpp.compiler.exe.release">
<option id="gnu.cpp.compiler.option.optimization.level.119698006" name="Optimization Level" superClass="gnu.cpp.compiler.option.optimization.level" value="gnu.cpp.compiler.optimization.level.most" valueType="enumerated"/>
<option id="gnu.cpp.compiler.option.debugging.level.1092756555" name="Debug Level" superClass="gnu.cpp.compiler.option.debugging.level" value="gnu.cpp.compiler.debugging.level.none" valueType="enumerated"/>
<option defaultValue="gnu.c.optimization.level.most" id="avr32.cpp.compiler.option.optimization.level.release.1174725341" name="Optimization Level" superClass="avr32.cpp.compiler.option.optimization.level.release" valueType="enumerated"/>
<option id="avr32.cpp.compiler.option.mcu.351058175" name="Microcontroller Unit" superClass="avr32.cpp.compiler.option.mcu" value="-mpart=uc3b0256" valueType="string"/>
<option id="gnu.cpp.compiler.option.include.paths.71125407" name="Include paths (-I)" superClass="gnu.cpp.compiler.option.include.paths" valueType="includePath">
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/DRIVERS/GPIO"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS"/>
</option>
</tool>
<tool id="avr32.managedbuild.tool.gnu.c.compiler.exe.release.1039047172" name="32-bit AVR/GNU C Compiler" superClass="avr32.managedbuild.tool.gnu.c.compiler.exe.release">
<option defaultValue="gnu.c.optimization.level.most" id="avr32.c.compiler.option.optimization.level.release.794532194" name="Optimization Level" superClass="avr32.c.compiler.option.optimization.level.release" valueType="enumerated"/>
<option id="gnu.c.compiler.option.debugging.level.40972969" name="Debug Level" superClass="gnu.c.compiler.option.debugging.level" value="gnu.c.debugging.level.none" valueType="enumerated"/>
<option id="avr32.c.compiler.option.mcu.1839009730" name="Microcontroller Unit" superClass="avr32.c.compiler.option.mcu" value="-mpart=uc3b0256" valueType="string"/>
<option id="gnu.c.compiler.option.optimization.flags.1039844609" name="Other optimization flags" superClass="gnu.c.compiler.option.optimization.flags" value="-fdata-sections" valueType="string"/>
<option id="gnu.c.compiler.option.preprocessor.def.symbols.564169436" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" valueType="definedSymbols">
<listOptionValue builtIn="false" value="BOARD=EVK1101"/>
</option>
<option id="gnu.c.compiler.option.include.paths.1362630832" name="Include paths (-I)" superClass="gnu.c.compiler.option.include.paths" valueType="includePath">
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/DRIVERS/GPIO"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/BOARDS"/>
</option>
<inputType id="avr32.managedbuild.tool.gnu.c.compiler.input.150529796" superClass="avr32.managedbuild.tool.gnu.c.compiler.input"/>
</tool>
<tool id="avr32.managedbuild.tool.gnu.c.linker.exe.release.165266930" name="32-bit AVR/GNU C Linker" superClass="avr32.managedbuild.tool.gnu.c.linker.exe.release">
<option id="avr32.c.linker.option.mcu.1351519830" name="Microcontroller Unit" superClass="avr32.c.linker.option.mcu" value="-mpart=uc3b0256" valueType="string"/>
<option id="gnu.c.link.option.nostart.834088664" name="Do not use standard start files (-nostartfiles)" superClass="gnu.c.link.option.nostart" value="true" valueType="boolean"/>
<option id="gnu.c.link.option.ldflags.335136437" name="Linker flags" superClass="gnu.c.link.option.ldflags" value="-Wl,--gc-sections -Wl,-e,_trampoline -T../src/SOFTWARE_FRAMEWORK/UTILS/LINKER_SCRIPTS/AT32UC3B/0256/GCC/link_uc3b0256.lds" valueType="string"/>
<option id="gnu.c.link.option.paths.484745652" name="Library search path (-L)" superClass="gnu.c.link.option.paths" valueType="libPaths">
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/BOARDS"/>
</option>
<option id="gnu.c.link.option.libs.1404159546" name="Libraries (-l)" superClass="gnu.c.link.option.libs" valueType="libs">
<listOptionValue builtIn="false" value="newlib_addons-at32ucr1-speed_opt"/>
</option>
<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.1128805698" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
<additionalInput kind="additionalinput" paths="$(LIBS)"/>
</inputType>
</tool>
<tool id="avr32.managedbuild.tool.gnu.cpp.linker.exe.release.2113442994" name="32-bit AVR/GNU C++ Linker" superClass="avr32.managedbuild.tool.gnu.cpp.linker.exe.release">
<option id="avr32.cpp.linker.option.mcu.1901547427" name="Microcontroller Unit" superClass="avr32.cpp.linker.option.mcu" value="-mpart=uc3b0256" valueType="string"/>
<option id="gnu.cpp.link.option.libs.1032174006" name="Libraries (-l)" superClass="gnu.cpp.link.option.libs" valueType="libs">
<listOptionValue builtIn="false" value="newlib_addons-at32ucr1-speed_opt"/>
</option>
<option id="gnu.cpp.link.option.paths.710540968" name="Library search path (-L)" superClass="gnu.cpp.link.option.paths" valueType="libPaths">
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS"/>
</option>
</tool>
<tool id="avr32.managedbuild.tool.gnu.assembler.exe.release.1134308698" name="32-bit AVR/GNU Assembler" superClass="avr32.managedbuild.tool.gnu.assembler.exe.release">
<option id="avr32.both.asm.option.debugging.level.1427267223" name="Debug Level" superClass="avr32.both.asm.option.debugging.level" value="avr32.both.asm.debugging.level.none" valueType="enumerated"/>
<option id="avr32.both.asm.option.mcu.1278576156" name="Microcontroller Unit" superClass="avr32.both.asm.option.mcu" value="-mpart=uc3b0256" valueType="string"/>
<option id="gnu.both.asm.option.include.paths.1271976605" name="Include paths (-I)" superClass="gnu.both.asm.option.include.paths" valueType="includePath">
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/DRIVERS/GPIO"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/BOARDS"/>
</option>
</tool>
<tool id="avr32.managedbuild.tool.gnu.preprocessor.exe.release.1127192891" name="32-bit AVR/GNU Preprocessing Assembler" superClass="avr32.managedbuild.tool.gnu.preprocessor.exe.release">
<option id="avr32.both.preprocessor.option.debugging.level.2108541238" name="Debug Level" superClass="avr32.both.preprocessor.option.debugging.level" value="avr32.both.preprocessor.debugging.level.none" valueType="enumerated"/>
<option id="avr32.both.preprocessor.option.mcu.1969341529" name="Microcontroller Unit" superClass="avr32.both.preprocessor.option.mcu" value="-mpart=uc3b0256" valueType="string"/>
<option id="avr32.both.preprocessor.option.flags.569503098" name="Assembler flags" superClass="avr32.both.preprocessor.option.flags" value="-Wa,-g" valueType="string"/>
<option id="avr32.both.preprocessor.option.paths.1536372767" name="Include paths (-I)" superClass="avr32.both.preprocessor.option.paths" valueType="includePath">
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/DRIVERS/GPIO"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/LIBS/NEWLIB_ADDONS/INCLUDE"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS/PREPROCESSOR"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/UTILS"/>
<listOptionValue builtIn="false" value="../src/SOFTWARE_FRAMEWORK/BOARDS"/>
</option>
<inputType id="avr32.managedbuild.tool.gnu.preprocessor.input.357900531" superClass="avr32.managedbuild.tool.gnu.preprocessor.input"/>
</tool>
</toolChain>
</folderInfo>
<sourceEntries>
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="src"/>
</sourceEntries>
</configuration>
</storageModule>
<storageModule moduleId="scannerConfiguration">
<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
<profile id="com.atmel.avr32.debug.AVR32ManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32ManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32StandardMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32StandardMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxStandardMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxStandardMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="makefileGenerator">
<runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/${specs_file}&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'g++ -E -P -v -dD &quot;${plugin_state_location}/specs.cpp&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/specs.c&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<scannerConfigBuildInfo instanceId="avr32.managedbuild.config.gnu.exe.debug.529300467;avr32.managedbuild.config.gnu.exe.debug.529300467.;avr32.managedbuild.tool.gnu.c.compiler.exe.debug.442220668;avr32.managedbuild.tool.gnu.c.compiler.input.305724172">
<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.atmel.avr32.debug.AVR32ManagedMakePerProjectProfileC"/>
<profile id="com.atmel.avr32.debug.AVR32ManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32ManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32StandardMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32StandardMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxStandardMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxStandardMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="makefileGenerator">
<runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/${specs_file}&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'g++ -E -P -v -dD &quot;${plugin_state_location}/specs.cpp&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/specs.c&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
</scannerConfigBuildInfo>
<scannerConfigBuildInfo instanceId="avr32.managedbuild.config.gnu.exe.release.753206473;avr32.managedbuild.config.gnu.exe.release.753206473.;avr32.managedbuild.tool.gnu.c.compiler.exe.release.1039047172;avr32.managedbuild.tool.gnu.c.compiler.input.150529796">
<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.atmel.avr32.debug.AVR32ManagedMakePerProjectProfileC"/>
<profile id="com.atmel.avr32.debug.AVR32ManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32ManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32StandardMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32StandardMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxStandardMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="com.atmel.avr32.debug.AVR32LinuxStandardMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-mpart=${part} -E -P -v -dD ${plugin_state_location}/${specs_file}" command="avr32-linux-g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="makefileGenerator">
<runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/${specs_file}&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'g++ -E -P -v -dD &quot;${plugin_state_location}/specs.cpp&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/specs.c&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
</scannerConfigBuildInfo>
</storageModule>
<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
<storageModule moduleId="org.eclipse.cdt.core.language.mapping"/>
<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
</cconfiguration>
</storageModule>
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
<project id="blink.avr32.managedbuild.target.gnu.exe_2.0.1.722307634" name="32-bit AVR/GNU Executable" projectType="avr32.managedbuild.target.gnu.exe_2.0.1"/>
</storageModule>
</cproject>
